RGY6×15S软胶囊机 RGY6×15F Soft Gel Encapsulating Machine
本设备搅拌总成采用活套连轴器连接，
便于拆装，用户拆装时，请注意上下搅拌
方向位置螺钉部位。接电时注意搅拌，应
顺时针方向旋转，若发现钢球磨损时，要
及时更换，并且调整或固紧（密封件总式）
轴头调节螺母。用户使用时，将本设备清
洗消毒后，按比例物料辅入罐内，再启动
减速机，待物料搅拌均匀，开启仓门放料。
保养时要经常检查减速机润滑油，若不足
时要及时补充，在设备暂时不用时一定要
用内外清洗干净，要保持内外表清洁光亮，
达到经久耐用。
The blender of this device adopts flexible shaft joint, easy to disa-ssembly and dean. When user dismmltle machine, please mind the bolt
location of blender run direction. It must be clockwise direction when connecting to electric power supply. In case finding any steel ball is
damaged, please change it in time, and adjust the fixing bolt. During the operation process, please clean and disinfect the equipment, put matexial into tank, start the reducer, until the mixer is in stable starus.Then open the valve for outler. Please inspect the machine lubrication oil regularly, and change the lubrication oil in time Clean the machine properly when it is in idle, so that the life of machine can be extended.
